Follow

AL - Auto-Level function

Auto-Level Function (AL)

The Auto-Leveling function should already be associated with the Primary Gain switch.  When the Auto-Leveling Function is enabled the HoverCore™ algorithm will automatically force the aircraft into a level position.  The on-board LED with turn blue to show that Auto-Leveling is enabled.  The user can still off-set the orientation of the aircraft using the control sticks for Roll, Pitch, and Yaw.  However, the flight behavior will feel different to the user because the HoverCore™ is fighting against the flight controls.  The flight input from the transmitter will dominate the control but in general the aircraft will not be as responsive.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk