Follow

HoverflyGIMBAL Setup Client

Before installing and operating your HoverflyGIMBAL, please perform a firmware update using the Hoverfly Firmware Update Client, found here:

http://www.hoverflytech.com/Software_Updates.html

On the same page, you will see the HoverflyGIMBAL Setup Client. You will need to download and install this program prior to following the instructions in the  HoverflyGIMBAL Users Guide, which covers basic configuration and operation. It is available here:

http://www.hoverflytech.com/uploads/HoverflyGIMBAL_Users_Guide_V1_Release.pdf

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

5 Comments

  • 0
    Avatar
    Benjamin Rowland

    I've gotten everything wired up, updated and calibrated, but my Cinestar gimbal servos don't respond.  Any suggestions?

    -Escalated to ticket and resolved-

  • 0
    Avatar
    Tanate

    I got the gimbal board today, 21 May. But can not download the software. Please guide

  • 0
    Avatar
    Tanate

    It say "Server Error in Application "61249867-HOVERFLYUPDATE.COM"

  • 0
    Avatar
    Ben Halsted

    All of our client services (client download as well as the update service) have been down off and on throughout the weekend due to a problem on our host's side. These issues were fixed Monday morning.

  • 0
    Avatar
    Jeff Patterson
    • Comment escalated to ticket -
Please sign in to leave a comment.
Powered by Zendesk