Tip of the Week for 06/10/13: Number One with a Bullet (Connector)

Let's try this again, since it didn't post last night when it should have...

If you use bullet connectors in your wiring harness, be sure to check these connections regularly. The vibrations of the aircraft can cause these connections to come loose, causing a loss of power or a board reset in mid-air. For this reason, we recommend that you check these connections whenever you swap batteries on your multirotor.

Was this article helpful?
2 out of 2 found this helpful
Have more questions? Submit a request


Article is closed for comments.
Powered by Zendesk