Follow

Tip of the Week for 03/01/13: HoverflyGIMBAL PID Settings for AV200 & Cinestar

Today's tip is straight from Dan Burroughs, lead engineer for the HoverflyGIMBAL:

A lot of HoverflyGIMBAL users inquire about the PID settings on the HoverflyGIMBAL Setup Client. These settings are used ONLY by continuous rotation servos. If your camera mount uses potentiometers on the Roll and Tilt axis, you can ignore these settings entirely.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

2 Comments

Article is closed for comments.
Powered by Zendesk